The installation of the car seat cover is relatively simple. According to the design of the car seat, each support part is equipped with a traction elastic rope, and is equipped with a special hook or hook, which can be hung on the bottom of the front seat or the back of the rear seat; The elastic hooks or hooks and loops provided by the seat cover can be hooked to each other through the bottom of the seat, or the hooks can be fixed in the iron plate hole at the bottom of the seat.

Specific installation method:
1. Headrest installation: The headrest is a cap-type design, which can be directly inserted into the seat headrest for adjustment.
2. Backrest installation: The backrest is a sleeve structure, which can be directly inserted into the backrest, tighten the elastic band at the bottom, and fasten the buckle.
3. Seat cushion installation: The seat cushion is designed as a cover. After the cover is installed, the bottom elastic belt is tightened on the inner side, and the hasp or rope is fastened.

When installing, the headrest should be removed first, and the backrest should be installed first. The tendons under the backrest must be hooked with hooks to ensure that the backrest must be shaped and look very comfortable. There are wrinkles!

The key point for the installation of the seat cover is in the rear row. Many riders in the back seat do not know how to open it. It is actually very simple. When you put your back down, you will find that on the side of the trunk, there is a wide black under the seat. There are two cloth strips, and when you pull it, you can open the rear seat, and you can install the rear seat cover when you open it.

Unfold the seat cover on the seat, and slowly pull down from the headrest to ensure that the seat cover is straight and the flower-shaped position of the seat cover is in the middle. Make a small elbow at the junction of the seat and the lean, and plug the small elbow into the gap between the seat and the lean. In this way, the seat cover cannot be easily displaced. The parts of the seat should be aligned, the shape of the seat should be revealed, and there is an elastic ring under the seat. Use a small iron hook to pull the elastic under the seat to ensure that the seat cover fits more snugly.

When the seat cover covers the headrest, you must first remove the seat headrest, then unfold the headrest, and tie the four corners with elastics, and the headrest is installed. When putting the back seat back, you must first take down the back seat, then unfold the back seat, and then hook the elastic on the seat cover under the seat.